| Size |
Product Name |
Short Description |
Download |
| 166 Kb |
UDDEHOLM ARNE |
Low alloyed, all-purpose steel with very good machinability, suitable for short run tooling for smaller tools. Conforms to W. Nr. 1.2510 / AISI O1. |
.PDF |
| 261 kB |
UDDEHOLM CALDIE |
High alloyed tool steel, suitable for short to medium run tooling where chipping and/or cracking are the predominant failure mechanisms and where a high compressive strength (hardness over 60 HRC) is necessary. |
.PDF |
| 375 kB |
UDDEHOLM CHIPPER/VIKING |
Versatile, high alloyed tool steel with excellent combination of toughness and wear resistance required for chipper-knives and heavy duty blanking and forming. |
.PDF |
| 174 kB |
UDDEHOLM RIGOR |
Medium alloyed tool steel with good resistance to both abrasive and adhesive types of wear as well as good resistance to cracking. All purpose tool steel for medium run cold work applications. Conforms to W. No. 1.2363 / AISI A2 / EN X100CrMoV5-1. |
.PDF |
| 636 kB |
UDDEHOLM SLEIPNER |
High alloyed tool steel with very broad properties profile. Very good substrate steel for all types of surface treatments. Extremely versatile conventional tool steel for medium run cold work tooling. |
.PDF |
| 155 kB |
UDDEHOLM SVERKER 3 |
High alloyed tool steel suitable for medium and long run tooling when a very good abrasive wear resistance is needed. Large carbides which are advantageous for abrasive wear resistance but reduces chipping resistance. Conforms to EN X210CrW12. |
.PDF |
| 143 kB |
UDDEHOLM SVERKER 21 |
High alloyed tool steel suitable for medium run tooling in applications where a good resistance to abrasive wear is generally needed. Close to W. No. 1.2379. |
.PDF |
| 130 kB |
UDDEHOLM UHB 11 |
Low alloyed carbon steel to be used in as-delivered condition as bolster or holder steel for tools and dies or other machine parts. Can also be used in hardened and tempered condition. Conforms to W. No. 1.1730. |
.PDF |
| 473 kB |
UDDEHOLM VANADIS 4 EXTRA SUPERCLEAN |
High alloyed metallurgical powder tool steel, suitable for long run tooling in applicaations with high demands on adhesive wear and chipping resistance. Improved version of VANADIS 4. |
.PDF |
| 218 kB |
UDDEHOLM 6 SUPERCLEAN |
High alloyed powder metallurgical tool steel suitable for long run tooling in applications with high demands on mixed wear (abrasive/ adhesive) and chipping resistance. Blanking and forming of hard work materials are typical applications. |
.PDF |
| 405 kB |
UDDEHOLM VANADIS 10 |
High alloyed powder metallurgical tool steel suitable for long runs in applications where abrasive wear dominates. The very good wear resistance combined with a good chipping resistance make it the best solution for abrasive applications. |
.PDF |
| 420 kB |
UDDEHOLM VANADIS 23 |
High alloyed powder metallurgical high speed steel, suitable for long run tooling in applications with high demands on mixed wear or where risk of plastic deformation of the working surface is encountered. Close to W. No. 1.3344 / AISI M3:2 |
.PDF |
| 147 kB |
UDDEHOLM VANADIS 30 SUPERCLEAN |
Cobalt high performance high speed steel. Cobalt has positive influence on hot wear resistance. Hot wear resistance and ductility are key properties in high speed steel cutting tools. Conforms to W. No. 1.3207 / M3:2+Co / EN HS 10-4-3-10. |
.PDF |
| 210 kB |
UDDEHOLM VANADIS 60 SUPERCLEAN |
High alloyed PM high speed steel with 10,5% cobalt, particularly suitable for cutting tools with high demand on wear resistance and hot hardness. Conforms to W. No. 1.3241. |
.PDF |
| 522 kB |
UDDEHOLM VANCRON 40 |
A nitrided powder tool steel for the very best resistance to galling and adhesive wear. No coating normally necessary. |
.PDF |
 |
| Size |
Product Name |
Short Description |
Download |
| 139 kB |
UDDHOLM ALVAR 14 |
Cr-Ni-Mo-V alloyed steel used in different tooling applications like support parts for extrusion. Material conforms to W. Nr. 1.2714 / EN 56NiCrMoV7. |
.PDF |
| 377 kB |
UDDEHOLM DIEVAR |
High performance hot work tool steel with very good resistance to heat checking, gross cracking, hot wear and plastic deformation. |
.PDF |
| 145 kB |
UDDEHOLM HOTVAR |
Very good high temperature properties and high hot wear resistance steel for warm forging and extrusion. |
.PDF |
| 188 kB |
UDDEHOLM ORVAR SUPREME |
High performance alloyed steel with good gross cracking and heat checking resistance. Good toughness and ductility in all directions. Conforms to W. No. 1.2344 / AISI premium H13 / EN X40CrMoV5-1. |
.PDF |
| 155 kB |
UDDEHOLM ORVAR 2 MICRODIZED |
A Cr-Mo-V alloyed tool steel with good high temperature strength and hot wear resistance. Widely used in aluminium extrusion applications. High dimension programme of round sizes. Conforms to W. Nr. 1.2344 / AISI H13 / EN X40CrMoV5-1. |
.PDF |
| |
Uddeholm Polmax |
Corrosion resistant mould steel with excellent polishability and machinability. Widely used for moulds for lenses, compact discs, memory discs and medical applications. Conforms to W. No. 1.2083 / AISI 420 Modified. |
.PDF |
| 198 kB |
UDDEHOLM QRO 90 SUPREME |
Very good high temperature strength and very good thermal fatigue resistance. |
.PDF |
| 179 kB |
UDDEHOLM THG 2000 |
Special steel for tool holders with enhanced machinability, good hardenability, ductility and hot wear resistance. Supplied soft annealed or prehardened to 42-45 HRC. |
.PDF |
| 361 kB |
UDDEHOLM VIDAR 1 |
Chromium-molybdenum-vanadium-alloyed steel characterized by good high-temperature strength, toughness and ductility, as well as good machinability, polishability and good through-hardening properties and size stability during hardening. |
.PDF |
| 415 kB |
UDDEHOLM VIDAR SUPERIOR |
An improved H11-type hot work steel with higher toughness and thermal fatigue strength. |
.PDF |
|
| Size |
Product Name |
Short Description |
Download |
| 156 kB |
UDDEHOLM ALUMEC/PRODAX |
High strength aluminium alloy with high strength and good stability. |
.PDF |
| 446 kB |
UDDEHOLM CALMAX |
Medium alloyed tool steel suitable for short and medium run tooling applications where very high chipping resistance is needed. Robust cold work steel for heavy duty blanking and forming. Conforms to W. No. 1.2358. |
.PDF |
| 427 kB |
UDDEHOLM CORRAX |
Powder tool steel. Stainless plastic mould steel with high wear resistance. |
.PDF |
| 554 kB |
UDDEHOLM ELMAX |
Powder metallurgically produced mould steel with a combination of very good wear resistance and corrosion resistance. Mainly used as insert material within the electronic industry. Also used for engineering applications. |
.PDF |
| 120 kB |
UDDEHOLM FORMAX |
Low alloyed carbon steel to be used in as-delivered condition as bolster steel for tools and dies or other machine parts. Conforms to SS 2172. |
.PDF |
| 125 kB |
UDDEHOLM HOLDAX |
Prehardened steel with very good machinability, good resistance to indentation and uniform hardness in all dimensions. Mainly as holder steel for the plastic industry but also for engineering applications. Conforms to W. No. 1.2312. |
.PDF |
| 334 kB |
UDDEHOLM IMPAX SUPREME |
Prehardened mould steel with very good polishing and photo etching properties, suitable for a wide range of injection moulds, blow moulds and extrusion dies for plastic. Supplied at 290-330 HB. Conforms to W. Nr. 1.2738 / AISI P20 Modified. |
.PDF |
| 748 kB |
UDDEHOLM MIRRAX ESR |
A combination of toughness, corrosion resistance and ability to reach uniform hardness levels throughout large cross sections, at the same time good surface finishes can be achieved. |
.PDF |
| 1.36 MB |
UDDEHOLM MOLDMAX HH |
High-strength beryllium copper mould alloy supplied at ca 40 HRC, suitable where a combination of high thermal conductivity, corrosion resistance and polishablity is needed. |
.PDF |
| 158 kB |
UDDEHOLM MOLDMAX XL |
High-strength copper-nickel-tin mould alloy supplied at ca 30 HRC, suitable when a combination of high thermal conductivity, corrosion resistance and polishablity is needed. |
.PDF |
| 487 kB |
UDDEHOLM NIMAX |
Prehardened mould steel with best toughness, machinability and good polishability. |
.PDF |
| 389 kB |
UDDEHOLM POLMAX |
Excellent polishability. Good resistance to corrosion and wear. Good machinability. |
.PDF |
| 367 kB |
UDDEHOLM RAMAX HH |
Stainless steel for holder blocks with excellent machinability and corrosion resistance. |
.PDF |
| 333 kB |
UDDEHOLM RAMAX LH |
Chromium alloyed stainless holder steel supplied in the hardened and tempered condition. |
.PDF |
| 458 kB |
UDDEHOLM STAVAX ESR |
Stainless plastic mould steel with excellent polishability and corrosion resistance. Conforms to W. No. 1.2083 / AISI 420 modified. |
.PDF |
| |
UDDEHOLM UNIMAX |
High hardness, very good toughness. ESR for good polishability. Suitable for coating and nitriding. |
.PDF |
|
